DUST CONTROL
Ermator S13 HEPA Dust Extractor
Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest,most dangerous-to-breath dust particles and prevents them from being released in the air. This HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration jobsite. It can also be connected to electrical power tools to extract the freshly cut and friable concrete dust, considered to be the most hazardous to construction workers. It’s time for you to stop using an ordinary vacuum and step-up to the innovation, performance and the power of an Ermator HEPA Dust Extractor
SPECIFICATIONS
FEATURES
| Ermator S13 | 200900058A | 200900058B |
| HP: | 1.7 | 1.7 |
| Voltage: VAC | 120 | 230 |
| Amperage: | 9.8 | 4.9 |
| Water Lift: Inches | 100 | 100 |
| CFM: | 129 | 129 |
| Shipping Weight: lbs |
78 | 78 |
| Hose: | 1.5" x 16' | 1.5" x 16' |
- Jet Pulse: efficient cleaning without opening vacuum
- Steel Clamps: corrosion resistant, secures vac during transport
- 2” Hose Inlet: offset for maximum cyclonic separation of dust, maximizes airflow (CFM). Includes safety cap for safe transporting and storage
- Bag Retaining Strap: secures bag during operation, fast and easy removal and replacement
- 6 mil, 4-gallon, Disposable Poly Bag: strong, safe & convenient disposal and handling of dust
- Welded frame/platform with 3” swivel locking casters: sturdy support & mobility even when bag is full
- Steel Handle: easy mobility on congested jobsites
- Easy access and storage of wand and floor tool
- Tested and certified cylindrical shaped HEPA filter: guaranteed 99.99% efficient at .3 microns. Dust is trapped in the inside of the filter, minimizing risk to operator during filter changing
- Bottom Mounted Vacuum Motor: commercial grade motor providing high CFM and waterlift for fast pickup. Low center of gravity provides excellent stability
- 10” Non-marking Rear Tires: smooth, easy transport over floor obstructions
- Conical Pre-Filter: stays clog free; cleans more thoroughly via jet pulse
- Manometer: measures the negative pressure within the tank and alerts the operator
Ermator S26 HEPA Dust Extractor
Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. This HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration jobsite. It can also be connected to electrical power tools to extract the freshly cut and friable concrete dust, considered to be the most hazardous to construction workers. To understand the uniqueness of our HEPA Dust Extractor, check out the major design features below. It’s time for you to stop using an ordinary vacuum and step-up to the innovation, performance and the power of an Ermator HEPA Dust Extractor.
SPECIFICATIONS
FEATURES
| Ermator S26 | 200900059A | 200900059B |
| HP: | 3.4 | 3.4 |
| Voltage: VAC | 120 | 230 |
| Amperage: | 19.6 | 9.8 |
| Water Lift: Inches | 100 | 100 |
| CFM: | 258 | 258 |
| Shipping Weight: lbs |
137 | 137 |
| Hose: | 2" x 25' | 2" x 25' |
- Jet Pulse: efficient cleaning without opening vacuum Steel Clamps: corrosion resistant, secures vac during transport and storage
- 2” Hose Inlet: offset for maximum cyclonic separation of dust, maximizes airflow (CFM)
- Safety Cap: prevents material from escaping through inlet during transportation and storage
- Longopac: 70-ft long plastic tube can be separated into approximately 25 individual sealed bags for fast, safe handling and disposal of dust.
- Welded frame/platform with 3” swivel casters: sturdy support & mobility even with full bags
- Steel Handle: easy mobility on congested jobsites
- On-Board Wand Storage: easy access to tools
- Dual tested and certified cylindrical shaped HEPA filters: guaranteed 99.99% efficient at .3 microns. Dust is trapped in the inside of the filter, minimizing risk to operator during filter changing. With filter compartment cap for fast, easy filter changes.
- Bottom Mounted Dual Vacuum Motors: two-motor power for fast pick-up.
- 10” Rear Tires: smooth, easy transport over floor obstructions
- Conical Pre-Filter: stays clog free; cleans more thoroughly via jet pulse
- Manometer: measures the negative pressure within the tank and alerts the operator
Ermator S36 HEPA Dust Extractor
Introducing the most powerful single-phase HEPA Dust Extractor on the market today. Three large, commercial-grade vacuum motors provide over 350CFM and 100-inches of waterlift, plenty of power to handle any mid-size planetary floor grinder. The S36 has a 230V, 1-phase, 30amp built-in power outlet for grinders.
Like all Ermator Dust Extractors, the model S36 is equipped with Jet Pulse filter cleaning, “drop-down” dust collection into a Longopac bag system and tested and certified HEPA filtration. What makes the S36 truly unique and unmatched in the concrete grinding and polishing industry is the quantity and size of its filters. It has a massive pre-filter with over 50-square feet of media, constructed in a coneshape to reduce filter loading. The unique shape of the S36 pre-filter also improves filter cleaning, when necessary, via the Jet Pulse filter cleaning system. Our competitors have difficulty including a single HEPA filter with their vacuums.
The S36 is equipped with three (3) independently tested and certified HEPA filters to guarantee that vacuum exhaust is absolutely dust-free! The S36 is also unmatched in its portability. Its surprisingly innovative dolly design makes loading and unloading a breeze. Once on the jobsite, this dust extractor easily navigates congested floor areas via a steel frame mounted on large rear wheels and lockable front swivel casters. Comes with 25’ x 2” hose, 33’ x 2.5” hose wand and floor too.
Like all Ermator Dust Extractors, the model S36 is equipped with Jet Pulse filter cleaning, “drop-down” dust collection into a Longopac bag system and tested and certified HEPA filtration. What makes the S36 truly unique and unmatched in the concrete grinding and polishing industry is the quantity and size of its filters. It has a massive pre-filter with over 50-square feet of media, constructed in a coneshape to reduce filter loading. The unique shape of the S36 pre-filter also improves filter cleaning, when necessary, via the Jet Pulse filter cleaning system. Our competitors have difficulty including a single HEPA filter with their vacuums.
The S36 is equipped with three (3) independently tested and certified HEPA filters to guarantee that vacuum exhaust is absolutely dust-free! The S36 is also unmatched in its portability. Its surprisingly innovative dolly design makes loading and unloading a breeze. Once on the jobsite, this dust extractor easily navigates congested floor areas via a steel frame mounted on large rear wheels and lockable front swivel casters. Comes with 25’ x 2” hose, 33’ x 2.5” hose wand and floor too.
SPECIFICATIONS
FEATURES
| Ermator S36 | 200900057A |
| HP: | 5.1 |
| Voltage: VAC | 230 Single Phase |
| Amperage: | 14.8 |
| Water Lift: Inches | 100 |
| CFM: | 353 |
| Shipping Weight: lbs |
181 |
| Hose: | 2" x 25' & 2.5" x 33' |
- Jet Pulse: for efficient filter cleaning
- Strong, ergonomic handles: also good for truck loading. Large ergonomic handles for easy tilt, transfer and loading, especially up and down steps.
- 2-inch hose inlet: with tight air seal
- Three tested and certified HEPA filters: each mounted above a single vacuum motor.
- Longopac Dustless: drop-down disposal via Longopac bag system
- 10-inch Rear Wheels: non marking
- Front Swivel Casters: 4-inch, lockable
- 50 square feet of pre-filter: maximizes air flow, minimizes interruptions and cleans efficiently.
- Central Exhaust: concentrated air exhaust may be vented away from jobsite with duct hose
