Carpet Glue & Mastic Removal

Remove stubborn glues and mastics on concrete using our PCD and metal bond tooling on any WerkMaster floor grinder

Werkmaster PCD - Epoxy & Paint Removal Tooling

PCD with TCD Shark

  • Description
  • Usage
  • Part #

What is a PCD Diamond?
Polycrystalline Diamond (PCD) is a diamond grit that has been fused together under high-pressure, high-temperature conditions in the presence of a catalytic metal. Use to remove high build glues and mastics on concrete using a WerkMaster grinder.

  • Use to rip off coatings over 1/8″ (3mm) in thickness
  • Excellent tool for aggressive removal of high build epoxy
  • Very good for removing high build coatings
  • Very good for removing cement levellers and toppings
  • Use on concrete
  • Speed Range: 400–900 rpm

Recommended use with the following machines:

Right (Clock Wise) & Left (Counter Clock Wise)

Direction Part #
Left (Counter Clock Wise) 002-1349-00
Right (Clock Wise) 002-1350-00
Standard Shark - 16 Grit - General purpose for coating removal, profiling and grinding

Standard Shark

  • Description
  • Usage
  • Part #

Soft, Medium and Hard bonds available for surface preparation tooling

  • Use to remove coatings less than 1/8″ (3mm) thick
  • Durable, premium quality tool
  • General purpose for coating removal, profiling and grinding
  • Good for thin mil coating
  • Use on concrete with standard tooling
  • Speed Range: 450–800 rpm

Recommended use with the following machines:

Only available in 16 Grit.

Grit Bond Part #
16 Gold (Soft) 002-1496-00
16 White (Medium) 002-1413-00
16 Red (Hard) 002-1414-00
Standard Shark - 16 Grit - General purpose for coating removal, profiling and grinding
Heavy Duty Sharks - 16 Grit - General purpose for coating removal, profiling and grinding

HD Shark

  • Description
  • Usage
  • Part #

Soft, Medium and Hard bonds available for surface preparation tooling

  • Use to remove coatings less than 1/8″ (3mm) thick
  • Durable, premium quality tool
  • General purpose for coating removal, profiling and grinding
  • Good for thin mil coating
  • Use on concrete with HD tooling
  • Speed Range: 450–850 rpm

Recommended use with the following machines:

Only available in 16 Grit.

Grit Bond Part #
16 Gold (Soft) 002-1493-00
16 White (Medium) 002-1426-00
16 Red (Hard) 002-1427-00