Aggressively remove coatings and create a bonding surface in 1 Step
Close up of a WerkMaster CSP3 profile on concrete
A WerkMaster concrete floor grinder is used to remove surface contamination and other foreign materials for new floor coverings or cementitious materials. Surface preparation is considered to be the most important step of any flooring application. Using the right diamond grinding tooling ensures effective removal when grinding concrete.
WerkMaster Concrete Grinding Machines with Octi-Disc™ Technology and our diamond grinding tooling will remove coatings like ceramic tile thin set, mastic, epoxy and carpet glue while leaving behind a clean bonding surface that meets or exceeds shot blasting requirements of CSP 2 or 3.
PCD Tooling
PCD with TCD Shark
PCD with TCD SHARK CW & CCW (Clockwise & Counterclockwise)
- Excellent tool for aggressive removal of epoxy
- Very good for removing high build coatings
- Very good for removing cement levellers and toppings
- Use on concrete
- Speed Range: 400–900 rpm
What is a PCD Diamond?
Polycrystalline Diamond (PCD) is a diamond grit that has been fused together under high-pressure, high-temperature conditions in the presence of a catalytic metal. This diamond tool will leave heavy to severe scratch patterns and it is recommended you use a Super Brazed diamond on the same tooling plate when using PCD tooling
Scarab | Termite XT | Viper XT | Raptor XT | Titan XT | Titan XT Propane | Colossos XT | Colossos XT Propane
Can be used in conjunction with Super Seg Metal Bond, Standard Metal Bond, TCDs, Double Sharks and specialty tools
Do not use with S Seg
Recommend:
2 segs per plate for Scarab, Termite XT, Viper XT, Raptor XT, Titan, Titan XT,
Titan XT Propane, Colossos XT, Colossos XT Propane
002-1349-00 PCD w/TCD Shark CCW
002-1350-00 PCD w/TCD Shark CW
Metal Bond Tooling
Standard Shark
Standard 2 Segment Shark 16 Grit
- Durable, premium quality tool
- General purpose for coating removal, profiling and grinding
- Good for thin mil coating
- Use on concrete with standard tooling
- Speed Range: 450–800 rpm
For floors # 7.5-9 on MOHS Hardness Scale Use Gold Tooling
For floors # 4.75–7.5 on MOHS Hardness Scale Use White Tooling
For floors # 2–4.5 on MOHS Hardness Scale Use Yellow Tooling
Scarab | Termite XT | Viper XT | Raptor XT
Tooling Configuration
Recommend:
2 segs per plate for Scarab, Termite XT, Viper XT, Raptor XT. Use in conjunction with Single Segment Standard Tooling (Except Scarab & Termite XT, Use 1 Shark and 1 Single Segment)
002-1496-00 Plug ‘N Go Standard 2 Segment Shark ( Gold – Soft Bond )
002-1413-00 Plug ‘N Go Standard 2 Segment Shark ( White – Medium Bond )
002-1414-00 Plug ‘N Go Standard 2 Segment Shark ( Yellow – Hard Bond )
HD Shark
Professional Shark (HD) 16 Grit
- Durable, premium quality tool
- General purpose for coating removal, profiling and grinding
- Good for thin mil coating
- Use on concrete with HD tooling
- Speed Range: 450–850 rpm
For floors # 7.5-9 on MOHS Hardness Scale Use Gold Tooling
For floors # 4.75–7.5 on MOHS Hardness Scale Use White Tooling
For floors # 2–4.5 on MOHS Hardness Scale Use Yellow Tooling
Tooling Configuration
Recommend:
2 segments per plate for Titan XT, Titan XT Propane, Colossos XT, Colossos XT Propane . Use in conjunction with Single Segment HD Tooling
002-1493-00 Plug ‘N Go HD 2 Segment Shark ( Gold – Soft Bond )
002-1426-00 Plug ‘N Go HD 2 Segment Shark ( White – Medium Bond )
002-1427-00 Plug ‘N Go HD 2 Segment Shark ( Yellow – Hard Bond )