WERKMASTER PCD

PCD Metal Bond Abrasives

• Use to rip off thin-set over 1/8″ (3mm) in thickness
• Use Hard Bond Tooling to remove thin-set under 1/8″ (3mm) in thickness
• Excellent tool for aggressive removal of high build epoxy
• Very good for removing cement levellers and toppings
• Use on concrete
• Speed Range: 400–900 rpm

STANDARD 2 SEGMENT SHARK

2 Segment Shark Standard 16 Grit

• Hard bond provides long life over soft concrete
• Good for removing thin set, dry glues, mastic and epoxy
• Use on Concrete
• Speed Range: 450–900 rpm

Standard TearDrop Segment

Standard TearDrop 16 Grit

• Hard bond provides long life
• Good for removing thin set, dry glues, mastic and epoxy
• Used on Concrete
• Speed Range: 450–750 rpm

HEAVY DUTY 2 SEGMENT SHARK

Heavy Duty 2 Segment Shark 16 Grit

• Hard bond provides long life over soft concrete
• Good for removing thin set, dry glues, mastic and epoxy
• Use on Concrete
• Speed Range: 450–900 rpm

• Mohs Hardness Test
• Use With
• Min Tooling Required
• Part #

For floors # 2–4.5 on MOHS Hardness Scale

Titan XT | Titan XT Propane | Colossos XT | Colossos XT Propane

Tooling Configuration

Recommend:
Use 2,  2 Segment Shark HD per plate in conjunction with 1 HD Single Segment on Titan XT, Titan XT Propane, Colossos XT, Colossos XT Propane

002-1427-00  2 Segment Shark HD – Hard Bond  16 Grit

HEAVY DUTY 1 SEGMENT

Heavy Duty 1 Segment 16 Grit

• Hard bond provides long life over soft concrete
• Good for removing thin set, dry glues, mastic and epoxy
• Used on Concrete
• Speed Range: 450–750 rpm

• Mohs Hardness Test
• Use With
• Min Tooling Required
• Part #

For floors # 2–4.5 on MOHS Hardness Scale

Titan XT | Titan XT Propane | Colossos XT | Colossos XT Propane

Tooling Configuration

Recommend:

Use 2,  2 Segment Shark HD per plate in conjunction with 1 HD Single Segment on Titan XT, Titan XT Propane, Colossos XT, Colossos XT Propane

002-1418-00  Heavy Duty 1 Segment Hard Bond  16 G